Please Note: Prices subject to change without notice

Price: $350 + GST + freight & handling

The water pump module has been developed for use as a hydraulic ‘motor-load’

Any of the ac or dc motors may be used as the prime mover

The Module enables Output-Power calculations using hydraulic pressure head measurement and flow rates

The Pumps Inlet & Outlet are standard 3/4″-14 BSP (i.e standard garden Tap thread) This allows ‘any-brand’ of standard garden hose accessories to be fitted to the pump

A separate stand-alone Hose-Kit is also available (Product PHK-001:  30m x 12mm clear Plastic Vinyl tubing & click-on hose fittings)

Click on to down load instructions >  200704 Pump instructions

HOW TO USE THIS PUMP

MOST IMPORTANT:

ONLY OPERATE IN A CLOCKWISE DIRECTION (Viewed on coupling)

ALWAYS DOUBLE CHECK THE CORRECT DIRECTION OF MOTOR ROTATION “PRIOR TO COUPLING THE MOTOR TO THE PUMP”

 ENSURE SUCTION HOSE IS ALWAYS IMMERSED.  BOTH BEFORE STARTING THE PUMP AND WHILE IN USE

WARNING

DO NOT LET THE PUMP RUN DRY

Turn off immediately when container is drained (pump becomes inoperable if run dry, and doing so voids warranty)

Not suitable for drinking water

Do not use with flammable or corrosive materials

MAX. PUMP RATINGS (Water (H₂0))

RPM                      : 3000

Output                  : 20 lt/min (0.33 lt.s^-1)(0.33 kg.s^-1)

Pump height        : 13.7 m

Self Priming        : 2.75 m max.